Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. And see here for current known issues.
I want to collect information from our WISM Wireless LAN Controllers.
So far I found the OID 220.127.116.11.4.1.1418.104.22.168.1.38 for collecting the number of clients per SSID.
I'm also looking to collect
- The total number of clients
- Total number of AP's on the controller (also total number UP and DOWN)
- Total number AP 802.11a/n Radios
- Total number AP 802.11b/g/n Radios
- Total number of active detected Rogue AP's
- The WISM CPU, memory usage
Any help is very much appreciated
You will probably want to take a look at these mibs on CCO ( www.cisco.com/go/mibs ) then view & download mibs:
From here you can search for mibs containing LWAPP also.
I'm now trying to add all this stuff to HP's NNM. I've found many MIB on this URL, maby there's what You need.
So far I found CPU & Memory usage in the AIRESPACE-SWITCHING-MIB and the number of clients per SSID in the AIRESPACE-WIRELLESS-MIB.
agentFreeMemory : 22.214.171.124.4.1.14126.96.36.199.3.0
agentTotalMemory : 188.8.131.52.4.1.14184.108.40.206.2.0
agentCurrentCPUUtilization : 220.127.116.11.4.1.1418.104.22.168.1.0
I still can't find an important one though "Total number of AP's on the controller (also total number UP and DOWN)"
Check out this thread:
Thanks that was very helpfull
please post the solution
Link is not working anymore
check out: https://supportforums.cisco.com/discussion/11312726/monitor-registered-aps-2504-snmp