Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WiSM to ACS communication problem

Just starting to test this out and configure everything. ACS is setup with the controllers and my test user. Using LEAP (802.1x). From the controller I can ping my ACS box and ping my access point. From the vlan that the access point is configured on I can ping to my ACS box. When I go to authenticate it fails. Check the failed attempts in ACS and there is no entry, which makes me think I'm not even hitting the box. Was thinking of putting a sniffer behind the ACS box, but will I see anything? Or will it be all encrypted? If there is anything I need to post here to get more help let me know. Thanks in advance.

1 REPLY
New Member

Re: WiSM to ACS communication problem

Also, when I take off the security. I connect and can ping everywhere with no problems. One more thing that has me a bit confused is that with the controller set to broadcast the SSID in the WLAN it won't broadcast.... atleast not that I'm seeing. Thanks again.

115
Views
0
Helpful
1
Replies