Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WiSM2 WLC 7.2 Maximum Allowed Clients under Global Parameters 802.11a/n b/g/n

Hello everyone,

Just loaded the 7.2.103.0 software onto the brand new WiSM2. Going throught the options and have found that under the global parameters for 802.11a/n, 802.11b/g/n radios is now the "Maximum Allowed Clients" option. The allowed setting is from 1 - 200 clients.

Does that mean only 200 clients will be allowed to associate to the WLC on that radio at a maximum?

Doesn't seems to make sense... I have the 500 AP license on this WiSM2... I know this option used to be an optional setting under a WLAN in previous releases.

Any ideas?

Regards,

Sasha.

Everyone's tags (4)
2 REPLIES
Hall of Fame Super Silver

Re: WiSM2 WLC 7.2 Maximum Allowed Clients under Global Parameter

That is per AP not wlc.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

WiSM2 WLC 7.2 Maximum Allowed Clients under Global Parameters 80

Does that mean only 200 clients will be allowed to associate to the WLC on that radio at a maximum?

As what Scott has responded, this means 200 clients per WAP.

If you do exceed 200 clients per WAP (or whatever value you put in there) the clients will just get a nag and the system will let you in eventually.

3616
Views
0
Helpful
2
Replies