Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WLAN Config

hi,

i have a 3 AccessPoints on the same floor. i always got below disconnected message in the logfile

what should i do. sometimes a client cannot connect to WLAN at all? please advise

#######################################

rface Dot11Radio0, Station 0004.75f6.92f2 Associated KEY_MGMT[NONE]

000320: *Mar 1 00:41:03.742: %DOT11-4-MAXRETRIES: Packet to client 0004.75f6.92f2 reached max retries, removing the client

000321: *Mar 1 00:41:03.743: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0004.75f6.92f2 Reason: Previous authentication no longer valid

000322: *Mar 1 00:41:05.341: %DOT11-6-ROAMED: Station 0003.2f24.6a53 Roamed to 000f.2371.ac66

000323: *Mar 1 00:41:17.517: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000324: *Mar 1 00:41:18.523: %DOT11-6-ROAMED: Station 0003.2f24.6a53 Roamed to 000d.bd6f.b35b

000325: *Mar 1 00:41:18.524: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53

000326: *Mar 1 00:41:29.593: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000327: *Mar 1 00:41:30.600: %DOT11-6-ROAMED: Station 0003.2f24.6a53 Roamed to 000d.bd6f.b35b

000328: *Mar 1 00:41:30.600: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53

000329: *Mar 1 00:41:41.671: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000330: *Mar 1 00:41:42.455: %DOT11-4-ENCRYPT_MISMATCH: Possible encryption key mismatch between interface Dot11Radio0 and station 0003.2f24.6a53

000331: *Mar 1 00:41:42.676: %DOT11-6-ROAMED: Station 0003.2f24.6a53 Roamed to 000d.bd6f.b35b

000332: *Mar 1 00:41:42.677: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53

000333: *Mar 1 00:41:53.746: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000334: *Mar 1 00:42:07.081: %DOT11-4-MAXRETRIES: Packet to client 0004.75f6.92f2 reached max retries, removing the client

000335: *Mar 1 00:42:07.081: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0004.75f6.92f2 Reason: Previous authentication no longer valid

000336: *Mar 1 00:42:10.666: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0004.75f6.92f2 Associated KEY_MGMT[NONE]

000337: *Mar 1 00:42:45.973: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53 Reason: Sending station has left the BSS

000338: *Mar 1 00:42:52.417: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000339: *Mar 1 00:43:11.232: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53 Reason: Sending station has left the BSS

000340: *Mar 1 00:43:16.664: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000341: *Mar 1 00:43:17.576: %DOT11-6-ROAMED: Station 0003.2f24.6a53 Roamed to 000f.2371.ac66

000342: *Mar 1 00:43:17.576: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0003.2f24.6a53

000343: *Mar 1 00:43:29.751: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0003.2f24.6a53 Associated KEY_MGMT[NONE]

000344: *Mar 1 00:43:37.673: %DOT11-4-ENCRYPT_MISMATCH: Possible encryption key mismatch between interface Dot11Radio0

and station 0003.2f24.6a53

000345: *Mar 1 00:45:17.450: %DOT11-4-MAXRETRIES: Packet to client 0004.75f6.92f2 reached max retries, removing the client

000346: *Mar 1 00:45:17.450: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0004.75f6.92f2 Reason: Previous authentication no longer valid

000347: *Mar 1 00:45:25.524: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0004.75f6.92f2 Associated KEY_MGMT[NONE]

000348: *Mar 1 00:45:26.633: %DOT11-4-MAXRETRIES: Packet to client 0004.75f6.92f2 reached max retries, removing the client

000349: *Mar 1 00:45:26.634: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0004.75f6.92f2 Reason:

1 REPLY
Community Member

Re: WLAN Config

This can happen if there is a mismatch in the security parameters on the client and the AP or due to RF interference. Check on these. It should resolve the issue

1385
Views
0
Helpful
1
Replies
CreatePlease to create content