Can the 2504 be configured to communicate with APs on one physical port while directing the wireless traffic out a different physical port? We want APs on 10.1.7.0 subnet to send wireless data to the WLC (CAPWAP) on 1 physical port and then have that data directed out another physical port on subnet 192.168.20.0 to our ASA firewall. Management port on WLC = 10.1.7.10. Gateway on ASA = 192.168.20.1.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...