Do you have a wireless control server? It would do it for you. Otherwise, you would have to determine the proper OIDS & other info and use an snmpset to do it via snmp 2c read/write community. You would most likely have to snmpwalk the controller and weed out the correct string to get the values for the ssid
If someone need to change PSK key for WLAN using SNMP, the working example is bellow. I hope this save time for somebody and you can take a cup of coffie instead spend time in Google, trying to find correct solution.
1) First of all using snmp we can get id of each existing WLAN: snmpwalk -v 2c -c test123 x.x.x.x enterprises.9.9.5220.127.116.11.1.4 SNMPv2-SMI::enterprises.9.9.518.104.22.168.1.4.1 = STRING: "WLAN1" SNMPv2-SMI::enterprises.9.9.522.214.171.124.1.4.2 = STRING: "WLAN2" SNMPv2-SMI::enterprises.9.9.5126.96.36.199.1.4.3 = STRING: "WLAN3" SNMPv2-SMI::enterprises.9.9.5188.8.131.52.1.4.4 = STRING: "WLAN4" SNMPv2-SMI::enterprises.9.9.5184.108.40.206.1.4.5 = STRING: "WLAN5" SNMPv2-SMI::enterprises.9.9.5220.127.116.11.1.4.6 = STRING: "WLAN6"
2) Than, we can set PSK for specific WLAN using this command: snmpset -v 2c -c test123 x.x.x.x enterprises.9.9.518.104.22.168.1.7.5 i 3 enterprises.9.9.522.214.171.124.1.8.5 s "94621518" where "test123" - snmp RW community "94621518" - new PSK for our WLAN "x.x.x.x" - WLC IP-address
P.S. Tested on Cisco AIR-CTVM-K9 with OS version - "126.96.36.199"
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...