Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 4402 - Can't ping between devices

I have a laptop connected to SSID1 and another to SSID2. Each can ping each other without a problem, but neither can ping a device on the SSID3 network. From a hard line (in this case off of one of the servers) I can ping the device on the SSID3 network without a problem.

There are no ACLs applied on the WLC or core switch where the VLANs are implemented.

Is there a setting somewhere on the SSID3 interface that could be blocking traffic?

We are running code 6.0.188.  All APs are 1242AG.

Thanks in advance for your help.

2 REPLIES
Gold

Re: WLC 4402 - Can't ping between devices

Do you have P2P Blocking enabled on the WLAN?  Or maybe an ACL on the default gateway between the two VLANs?

New Member

Re: WLC 4402 - Can't ping between devices

P2P blocking is disabled.

Turns out that the issue is with the clients and not the network.

1142
Views
0
Helpful
2
Replies