Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 4404-100/ACS 3.2/Windows 2003 ADS/ WLAPP AP1231

Equipments:

1. WLC4404-100

2. AP 1231 WLAPP

3. ACS 3.2

4. Windows 2003 ADS

We want to created dynamic VLANs, based on user's Web login authentication it'll place them to the correct VLAN.

We have one single broadcase SSID "SCHOOL" which faculty, student and guest will use to gain wireless access. I want to use ACS as the management inferface for management.

Please provide any helpful links?

THanks!

~GM

1 REPLY
Cisco Employee

Re: WLC 4404-100/ACS 3.2/Windows 2003 ADS/ WLAPP AP1231

Hi David,

Check this link for AAA override feature which will let you configure dynamic vlans based on user's web login authentication.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40sol.htm#wp1124844

Check this link to configure WEB LOGIN AUTHENTICATION

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

Check this link to configure basic WLANs

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40wlan.htm

To have a look at the complete configuration guide for 4400 controller have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/index.htm

HTH

Ankur

*Pls rate helpfull post

161
Views
3
Helpful
1
Replies