Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

WLC 5508 and Microsoft Radius Server 2008

Hi, I am trying to setup WLC 5508 for a customer who want to use MS NPS for Radius authentication, however there aren't many good documents showing how to configure the MS NPS.

I have couple of questions:

1, Does WLC 5508 support MS NPS on Server 2008 R2?

2, Are there any good document showing how to configure this?

Thanks

1 REPLY
Cisco Employee

Re: WLC 5508 and Microsoft Radius Server 2008


Hadisharifi,


There is no single document that we can pick for configuring WLC and NPS. However, you may visit the below listed document for NPS  and WLC side configuration:


Configure the WLC for RADIUS Authentication through an External RADIUS Server

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml#c2


Fo the NPS side configuration, you may consider the attached document.


Regds,

JK


Do rate helpful posts-

~BR Jatin Katyal **Do rate helpful posts**
11049
Views
0
Helpful
1
Replies
CreatePlease to create content