Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC-8500 HA architectured managed by Network Node Manager

Hi all,

We have two WLC8500 (version 7.5.102) configured as High Availability (APSSO) back-to-back for redundacy. The network manager and trap receiver for Operators is a HP Network Node Manager. At this moment, we want a very basic integration with the sever just to check hardware issues (power supplies, links, fans, AP status, etc.). The NNM detects both chasis as just one box, because both WLC sends traps using the same Managent IP address. Are there any way to detect both WLC individually?

thanks a lot,

juan

Everyone's tags (4)
3 REPLIES

WLC-8500 HA architectured managed by Network Node Manager

Try using the redundant management interface as that is unique to each WLC.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

WLC-8500 HA architectured managed by Network Node Manager

When we send a snmp request to the redundat IP address, the secondary WLC responds using the global IP address.

Cisco Prime also detects only a WLC. Do you konw if we can gather information about the secondary WLC through the PRIME?

thanks a lot,

Juan

Hall of Fame Super Silver

WLC-8500 HA architectured managed by Network Node Manager

Currently, Prime can only gather information on the primary WLC node. not the HA or backup pair.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
284
Views
3
Helpful
3
Replies