Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC: Configuring Global Credentials for Access Points

Hi,

I have an WLC 4404 running Software Version 5.0.148.0 with 40 LWAPPs (1242AG, some 1231G). I want to configure global credentials for the LWAPPs. The configuration guide did not mention, if I have to reboot the LWAPPs after setting the credentials.

So, could I set this option during operation time? Thanks a lot for your help.

Regards

Simon

3 REPLIES
Hall of Fame Super Silver

Re: WLC: Configuring Global Credentials for Access Points

If you want to create a username and password for your LAP's then enter this command:

config ap username password

-Scott
*** Please rate helpful posts ***

Re: WLC: Configuring Global Credentials for Access Points

Hi,

Configuring the "Override global credentials" option in the GUI does not reboot the AP. It can be done in a production environment, just did it on one of my 1252s to test.

Hope it helps.

Jerome

New Member

Re: WLC: Configuring Global Credentials for Access Points

It's working fine. Thanks for your help.

584
Views
5
Helpful
3
Replies