Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC failover

hay

I have two WLC 4000 configured as failover.

does the configuration synchronize between the two WLCs?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WLC failover

No it doesn't sync configuration.... you need to configure each wlc and make sure that both are in the same mobility group in order for the ap's to know of both wlc's.

You would need to configure the access points with a primary, secondary or tertiary wlc, in order for that ap to know which wlc it should be joined with.

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Re: WLC failover

No it doesn't sync configuration.... you need to configure each wlc and make sure that both are in the same mobility group in order for the ap's to know of both wlc's.

You would need to configure the access points with a primary, secondary or tertiary wlc, in order for that ap to know which wlc it should be joined with.

-Scott
*** Please rate helpful posts ***
New Member

Re: WLC failover

thanks fella

Hall of Fame Super Silver

Re: WLC failover

It is also not a transperant failover since ap's will have to join the secondary or tertiary wlc.

-Scott
*** Please rate helpful posts ***
206
Views
0
Helpful
3
Replies