Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wlc ha 7.4 with different components hardware

Hi my name is Ivan I have a question

Is possible configure a WLC HA ver 7.4 with two WLC's with differents hardware components?

I have a wlc with one power supply and the second wlc have two power supply (its part number say air-ct5508-HA...)

Is possible to do it?

Regards

Ivan

2 REPLIES
Hall of Fame Super Silver

Re: wlc ha 7.4 with different components hardware

Power supplies don't matter per say... if you have one WLC 5508 and you get another but the HA sku, that is fine.  you can't mix a 2504 and a 5508 in HA AP SSO.

I'm ggoin to assume your going to do AP SSO, so stick with v7.4.110.0 of v7.4 121.0 and foolow this guide:

http://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/High_Availability_DG.pdf

If you are going to do N+1 instead, then look at this guide

http://www.cisco.com/en/US/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide.pdf

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Re: wlc ha 7.4 with different components hardware

Refer to Fast Facts on High Availability (HA) of the below WLC HA document.

https://supportforums.cisco.com/docs/DOC-26827

177
Views
0
Helpful
2
Replies
CreatePlease login to create content