Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC Isolating Users

Hi All, I am testing a Cisco 2000 Series Wireless Controller with an eye on the WISM. I would like to know if any one out there has been successful at being able to throw troubled users into a limited access vlan for self remediation and isolation through a WLC. The limitation seems to be in order to place someone in a different vlan one must create an additional SSID to associate with the limited access vlan that is not good as we cannot force users to associte with an addition SSID. Anybody find a way to create two vlans which are associated with ONE SSID?

Regards,

Brian

2 REPLIES
New Member

Re: WLC Isolating Users

The WLC will have no idea which vlan to use in this scenario. You can do this through a clean access setup with the WLC.

http://cisco.com/en/US/partner/products/ps6128/prod_technical_reference09186a0080540637.html

Re: WLC Isolating Users

Hi,

Another solution would be,

(Posture Validation + Dynamic VLAN assignment) using ACS

Regards,

Prem

144
Views
3
Helpful
2
Replies
CreatePlease to create content