Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WLC serving multiple sites

Is there a way to stop the broadcasting of certain SSID's on certain access points? The customer has a WLC deployed at their main location, with a few APs hanging off of it at a remote. It would be nice if the remote location only broadcasted the networks it can support locally. Thanks!

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Re: WLC serving multiple sites

You need to define and use AP Groups. This allows you to specify what APs will have what ssids.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: WLC serving multiple sites

You need to use ap groups.

Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

HTH

Amjad

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"
3 REPLIES
Hall of Fame Super Silver

Re: WLC serving multiple sites

You need to define and use AP Groups. This allows you to specify what APs will have what ssids.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: WLC serving multiple sites

You need to use ap groups.

Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

HTH

Amjad

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"
Community Member

WLC serving multiple sites

Thank you very much fellas, that worked perfectly.

328
Views
0
Helpful
3
Replies
CreatePlease to create content