Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC show configuration

Hi,

I would like to know whether there is any command that shows the configuration of the wireless controller (5508) like when you upload the configuration file from the GUI of the WLC. In other words, I don't want to show me all the verbose running configuration as the "show running-config", but a brief configuration as for example described below:


config time timezone location 13
config time ntp interval 43200
config time ntp server 1 10.x.x.x
config advanced 802.11b channel add 1
config advanced 802.11b channel add 6
config advanced 802.11b channel add 11
config advanced 802.11a channel add 36
config advanced 802.11a channel add 40
config advanced 802.11a channel add 44
config advanced 802.11a channel add 48
config advanced 802.11a channel add 52
config advanced 802.11a channel add 56
config advanced 802.11a channel add 60
config advanced 802.11a channel add 64
config certificate generate webadmin
config interface address management 10.x.x.x 255.255.255.0 10.x.x.x
config interface port management 1 2
config interface dhcp management primary 10.x.x.x secondary 10.x.x.x
config interface

continues
.....


Thank you in advance.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: WLC show configuration

I believe the show tech support command has this information.

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

Re: WLC show configuration

I believe the show tech support command has this information.

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
Silver

WLC show configuration

hello

please try

show run-config commands

or show running-config commands

Kind regrads

Talal

========

please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily

8005
Views
5
Helpful
2
Replies
CreatePlease to create content