I have upgraded our WLC 4404 to new version 18.104.22.168, since the upgrade the table showing the number of clients connected does not decrease when a client disconnects from the associated AP. Is this a BUG?, this worked OK with version 4.0
The clients do not get removed when you click the manually remove, and the authentication shows 'No', and the Status shows 'Associated', even when the client laptop is disconnected and power off. We are using WEB authentication with upgraded AP1200 to LWAP. We have two WLC 4404 and is happening on both, I have to reboot the WLC to clear the table. Just made a test connection with an AP1020 and seems to work OK, looks like it might be a legacy problem.
Due to some critical enhancements that were made to the bootloader software for the Cisco WiSM, Catalyst 3750G Wireless LAN Controller Switch, and 4400 series controllers, you must install the Cisco Unified Wireless Network Controller Boot Software 22.214.171.124 _ER.aes image either before or after installing the 126.96.36.199 .aes file.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...