Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC vs WCS version

Hi guys,

can i use version 5.2.178 on my controller and 4.2.110 on my wcs?

Better:

have WLC and WCS to run the same main version (4.2 and 4.2,5.2 and 5.2) or are the wlc and wcs version not related?

(5.2 and 4.2)

thx...

1 ACCEPTED SOLUTION

Accepted Solutions

Re: WLC vs WCS version

You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.

3 REPLIES

Re: WLC vs WCS version

You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.

New Member

Re: WLC vs WCS version

Hey Guys,

I have WLC 5.0.148.0 i'm trying to add controller to WCS 4.1.83.0 but getting errors.

Should this work or do I need to upgrade WCS to 5.0 or 5.2?

Hall of Fame Super Red

Re: WLC vs WCS version

Hi Eoin,

The WCS needs to be at an equal or higher level than the WLC. You would need Cisco Wireless Control System (WCS) software release 5.0.55.0 as a minimum supported version;

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn5014x0mr1.html

Hope this helps!

Rob

228
Views
4
Helpful
3
Replies
CreatePlease login to create content