06-17-2012 09:45 PM - edited 07-03-2021 10:18 PM
Is it possible to limit what users are able to do and view in the webconsole of a WLC 5508 via ACS. I have ACS setup to restrict what commands can be run depending on user on the CLI however when they log into the webconsole they can access everything?
06-17-2012 10:55 PM
You need to define custom tacacs+ service on your ACS and then define the Role for each user or group of users that identify the forms they should access only. The following link contains everything you need:
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wp1697872
one more thing , Roles are case sensetive make sure to copy and paste as mentioned above
-------------------------------------------------------------------------------------------
Please Make sure to rate correct answers
09-16-2012 12:30 AM
Thanks Dehnee,
Actually I rated your reply with 2 rather than 5 and it can not be changed
I hope that the originator will mark your answer as the correct answer.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: