Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WLC webconsole permissions and ACS.

Is it possible to limit what users are able to do and view in the webconsole of a WLC 5508 via ACS. I have ACS setup to restrict what commands can be run depending on user on the CLI however when they log into the webconsole they can access everything?

2 REPLIES
Cisco Employee

WLC webconsole permissions and ACS.

You need to define custom tacacs+ service on your ACS and then define the Role for each user or group of users that identify the forms they should access only. The following link contains everything you need:

http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wp1697872

one more thing , Roles are case sensetive make sure to copy and paste as mentioned above

-------------------------------------------------------------------------------------------

Please Make sure to rate correct answers

WLC webconsole permissions and ACS.

Thanks Dehnee,

Actually I rated your reply with 2 rather than 5 and it can not be changed

I hope that the originator will mark your answer as the correct answer.

Regards,

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"
578
Views
2
Helpful
2
Replies
CreatePlease to create content