Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

WLC4402 - Enabling Interin Update Packets

We have a controller that communicates with an external radius server which in turn debits an account depending on how much MB usage the customers does.

For this to work effectively we need to get the WLC to send Interim update packets at regular intervals.

Has anyone got any ideas how we can go about this??


Re: WLC4402 - Enabling Interin Update Packets

The WLC controller uses a single RADIUS accounting record (start) for 802.1x client authentication and IP address assignment, and an interim update is sent after the client is assigned an IP address.

Here is the Administration guide for WLC following guide may help you :

New Member

Re: WLC4402 - Enabling Interin Update Packets

Ok then I guess my question is how can I get the current usage stat to the radius server at regular intervals?

CreatePlease to create content