I just got a WLSE 1030 Express which won't boot. After plugging the console cable in and turning it on, I wasn't able to get to the cli. Then, I tried plugging in a monitor and a keyboard and I saw the following error: NO BOOT CD. It seems like the BIOS can't detect any HD on the machine, so it tries to boot from the CD. I tried loading the discs that came with the hardware, but it didn't help. Anyone ever seen this? thanks
Connect via the console on the box, not via the video port. Re-boot and check to see if it is even doing the POST. Can try changing the boot order in the BIOS to force it to boot off the CD drive via the recovery CD. Other wise, may need to replace the box.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...