Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLSE and ACS

When I configure my WLSE server (2.5) with an ACS and add the WLSE server TO the ACS server I get the message:

Radius server is not available

in the faults on WLSE and get the message:

"Invalid messsage authenticator in eap request"

in the ACS log.

Any suggestions

2 REPLIES
Blue

Re: WLSE and ACS

See Table 2-3 Server Faults: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cwparent/cw_1105/wlse/2_5/ts_gd/faults.htm#1029186 for details and recommended action on this fault in WLSE. You need to add WLSE as a client in your ACS server. After you add AAA servers to the WLSE, the WLSE automatically performs periodic logins on each server to monitor the server's response time and availability and

displays this information under Reports > Trends.

Bronze

Re: WLSE and ACS

That error message is misleading. It indicates that you did not configure correct secret in WLSE under "devices > discover > AAA server".

In addition, also make sure you have created WLSE as NAS on ACS and authentication using "RADIUS (Cisco Aironet)"

150
Views
0
Helpful
2
Replies
CreatePlease login to create content