Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLSE and Number of client associations

Hello,

I have the WLSE appliance to manage some AP1100 (AIR-AP1121G-E-K9).

When I try to list the Number of Clients Connected to the AP's, this number is negative.

This is because the WLSE 2.5 don't have support for 802.11g AP's or could be because some other problem?

Thanks by your help,

Nuno.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: WLSE and Number of client associations

This is due to a known AP IOS bug, CSCec89492. Will be fixed in 12.2(15)JA.

4 REPLIES
Blue

Re: WLSE and Number of client associations

1) If you're using WLSE 2.5, the it does not support "g" radios currently. Up coming release will support this.

2) As for the negative client issue, this is also due to a IOS bug on the AP itself, not an issue with WLSE. It will also be fixed in the upcoming IOS version.

Bronze

Re: WLSE and Number of client associations

This is due to a known AP IOS bug, CSCec89492. Will be fixed in 12.2(15)JA.

New Member

Re: WLSE and Number of client associations

Thanks.

It has a prevision of a publication date to this version?

Nuno.

Bronze

Re: WLSE and Number of client associations

12.2(15)JA will be available by end of April. You may expect it sooner.

148
Views
1
Helpful
4
Replies
CreatePlease to create content