Hi all. I am hoping someone can assist me with this.
I have 10 APs (all 1242s) and a WDS (also running on a 1240 Aironet). All of the APs authenticate to the WDS successfully. The WDS uses it's own local RADIUS server for authentication and there is a single username/password setup on it. As I said. It works for the APs.
I recently installed a WLSE device and am working on getting it going. I am stuck on one issue.
WLSE failed to authenticate with WDS
I've configured the WLCCP credentials on the WLSE but it still does not work.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...