Hi, Dear all
I'm confused in the WLSE version and the managed AP IOS version.
The supported device message could be found at the link below:
http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_device_support_tables_list.html
My question is that whether the WLSE V2.12 only support the AP with IOS 12.3(2)JA the specified IOS release in that page?
If this is true, is that mean, we could only book an old version for the customer? Because to avoid new IOS uncertain influence to their real time product line, the user would rather not to upgrade to the new version of IOS.
And is the Firmware it mentioned is the AP’s Boot Loader ? For example:
When we use "show version", we can see 2 version info, one is BootLoader, another is the IOS. Which is the Firmware PLS?
=================================================================
AP1100>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1100 Software (C1100-K9W7-M), Version 12.2(15)XR2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 17-Sep-04 13:29 by kellythw
Image text-base: 0x00003000, data-base: 0x005E8494
ROM: Bootstrap program is C1100 boot loader
BOOTLDR: C1100 Boot Loader (C1100-BOOT-M) Version 12.2(4)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
AP1100 uptime is 5 days, 12 hours, 43 minutes
System returned to ROM by power-on
System image file is "flash:/c1100-k9w7-mx.122-15.XR2/c1100-k9w7-mx.122-15.XR2"
====================================================================
