cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
351
Views
0
Helpful
2
Replies

WLSM - cannot route traffic to it

6mraddie
Level 1
Level 1

I have cat6513, sup720 (ver 12.2(18)SXF3) and wlsm (ver 2.1(1)). I have L2 and L3 vlan 11 interface (ip in same subnet as wlsm admin vlan) configured on sup720 and "wlan module 2 allowed vlan 11"

I can ping the wlsm from the sup720 (and vice versa) but not from anywhere else on the network (even though all other routers have a route to the vlan 11 subnet).

Without this basic ip connectivity, 1231ap will not be able to register with wlsm and wlsm will not be able to talk to acs server.

any ideas - I think it may be 802.1q related but cannot change native vlan on this backplane connection.

sup720 partial config

=====================

wlan module 2 allowed-vlan 11

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

11 wds active

interface Vlan11

description wlsm management

ip address 192.168.11.1 255.255.255.0

end

--------------------------------------------------------

wlsm partial config

===================

wlan vlan 11

ipaddr 192.168.11.2 255.255.255.0

gateway 192.168.11.1

admin

interface Ethernet0/0

mac-address 0014.1c5b.f19d

no ip address

no cdp enable

hold-queue 2048 in

!

interface Ethernet0/0.11

encapsulation dot1Q 11

ip address 192.168.11.2 255.255.255.0

no cdp enable

!

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.11.1

2 Replies 2

nagle
Level 1
Level 1

I am having the same exact problem. If you don't mind would you share what did you need to do to get it working?

Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: