Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WPA Migration Mode

We have Cisco Aironet 1130AGs. We are going to transition our network to WPA, but now it's all WEP. I'd like to set up WPA Migration mode on all of our access points so WEP and WPA clients can access it, but I'm having problems setting it up. Does anyone have a step-by-step guide for this?

Thanks,

Scott

1 ACCEPTED SOLUTION

Accepted Solutions

Re: WPA Migration Mode

Hi Scott,

follow commands for this configuration:

ap1200# configure terminal
ap1200(config)# configure interface dot11radio 0
ap1200(config-if)# ssid migrate
ap1200(config-ssid)# authentication open
ap1200(config-ssid)# authentication network-eap adam
ap1200(config-ssid)# authentication key-management wpa optional
ap1200(config-ssid)# wpa-psk ascii batmobile65
ap1200(config-ssid)# end
ap1200(config-if)# encryption mode cipher tkip wep128
ap1200(config-if)# encryption key 3 size 128 12345678901234567890123456 transmit-key

4 REPLIES

Re: WPA Migration Mode

Hi Scott,

follow commands for this configuration:

ap1200# configure terminal
ap1200(config)# configure interface dot11radio 0
ap1200(config-if)# ssid migrate
ap1200(config-ssid)# authentication open
ap1200(config-ssid)# authentication network-eap adam
ap1200(config-ssid)# authentication key-management wpa optional
ap1200(config-ssid)# wpa-psk ascii batmobile65
ap1200(config-ssid)# end
ap1200(config-if)# encryption mode cipher tkip wep128
ap1200(config-if)# encryption key 3 size 128 12345678901234567890123456 transmit-key

New Member

Re: WPA Migration Mode

Thanks Andre.

The command - ap1200(config-if)# ssid migrate
Is "migrate" the name of the ssid?

Is there a way to do this through the web interface?

Thanks,

Scott

Re: WPA Migration Mode

Yes, migrate is SSID name.

I belive configure in web interface is possible, but I never try and have not Cisco guide.

But you can try this in web interface

SSID Manager

     Select SSID > Your SSID

     Open Authentication > NO ADDITION

     Key Management > Optional

     WPA PSK > Youer WPA PSK

     Apply

Encryptation Manager

     Set Encryption Mode and Keys for VLAN > Your VLAN

      Cypher > TKIP + WEP40 or WEP128

     Encryptation Keys

          Encryptation Key 3 > Your WEP Key

Can be necessary change some option...

New Member

Re: WPA Migration Mode

Thanks for your help.

917
Views
5
Helpful
4
Replies