Is it possible to have a small number of standalone (no controller) AP's run WPA-PSK with TKIP and use one AP for WDS to enable fast roaming, but without having to have any kind of local or server based authentication ? I don't want to have to define logins for each user, I just want to use a single pre-shared key and need them to be able to roam seamlessly between APs.
I understand that you want to implement layer 2 fast secure roaming without using a dot1x authentication. If this is correct, then I think you can do the configuration you have mentioned. But, for sure, fats secure roaming, th client and the Ap shuld support CCKM.
Yes it is possible, it actually works fairly well. Just make sure that your WDS AP is one that does not take a large load connected clients, otherwise the WDS service will be deminished becaues the AP will worry about the clients.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...