i wanted to increase the security on my 1121G accesspoint by enabling wpa2 with aes encryption. i set this up in a test environment and i configured my wireless client to connect, my wireless client (ibm thinkpad t42p with 11a/b/g Wireless LAN Mini PCI Adapter II has the ability to either select WPA or WPA2 and whether you use TKIP or AES. i selected WPA2 and AES enter the encryption key which i had entered on the AP and i connected,
i change the settings on the client to WPA and TKIP and entered the same encryption key and i managed to connect as well, which puzzles me, when i enter an incorrect encryption key it won't associate.
is this normal behaviour or do you think i have configured something incorrectly on the 1121G AP?
i have attached my config and have removed some personal data.
with the config i have i seem to be able to login using either tkip or aes, but i don't think i have got mixed mode configured on the AP so it should only accept WPA2-AES encryption but it also accepts TKIP making me believe something is configured incorrectly.
should i change anything in the config on the AP to only allow WPA2-AES encryption?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...