Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WPA2 with Active Directory for 802.1x?

Hey all,

I'm working on a wireless project with 8 1130 APs. I need to do WPA2 if possible and integrate users from active directory.

I'm search cisco.com, and not finding alot of help.

Any help would be great

Chris Serafin

Security Engineer

chris@chrisserafin.com

3 REPLIES
New Member

Re: WPA2 with Active Directory for 802.1x?

Hello,

This is possible and I would say there is a lot of documentation on cisco.com on this subject. Just look under Tech Support & Documentation and find your wireless product. It will include configuration examples which are very helpfull.

You will need to run a radius server between your ap's and active directory. We use Cisco ACS 4.1, but you could use freeradius or microsoft radius.

regards,

Rutger

New Member

Re: WPA2 with Active Directory for 802.1x?

I will keep looking, but I have yet to find any good documentation.

Any links, or docs you use?

Thanks for anything.

Chris Serafin

chris@chrisserafin.com

cserafin@rkon.com

New Member

Re: WPA2 with Active Directory for 802.1x?

I found this document under 1130 AP:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml

The document is written for a 1300 AP, but setting upp wpa2/radius/ad is nearly the same on all of Cisco's AP's I would say.

Rutger

278
Views
0
Helpful
3
Replies