Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding Custom Attributes for Juniper Netscreen TACACS+ Authentication

 

Introduction:

This document helps in achieving intigration between Junioer Netscreen and ACS 5.2.

 

 

Problem:

Do the vsys and privilege attribute are required to be added seperately or together?

 

 

Solution:

 

The advice is to add it to the group as follows:

 

ervice = netscreen {
vsys = root
privilege = read-write
}

 

This problem can be fixed by making different device groups and shell profiles mapped to different authorization profiles.

 

Setup for juniper:

 

Step 1:

image 1.png

 

Step 2:

image 2.png

 

Source Discussion:

ACS 5.2 - Adding Custom Attributes for Juniper Netscreen TACACS+ Authentication

579
Views
5
Helpful
0
Comments