Cisco ASA 5500 static Destination NAT version 8.3 +
This document will explain the configuration for Destination NAT, required in some environment where the organization cannot use the destination IP inside the network.
In this configuration we will take three different subnet IP’s for explanation.
The user Bob (192.168.0.10) wants to connect to one of server which is outside campus network with ip 172.16.1.100, but he cannot connect because the subnet 172.16.x.x /24 is already been used inside the campus and network administrator cannot advertise this Server IP inside. For this reason network administrator asks Bob to use the ip 10.1.1.100 which is translated on the Cisco ASA to the Real IP address of Server (i.e 172.16.1.100).
Create object for Real Server IP and nat to the IP which will be used inside to access this server (Destination NAT)
Object network SERVER-IP-172.16.1.100
nat (outside,inside) static 10.1.1.100
Create object for inside IP nated to original Server IP.
Object network NATED-IP-10.1.1.100
nat (inside,outside) static 172.16.1.100
Create object for original source ip if one want to nat the Source IP
Object network USER-IP-192.168.0.10
nat (inside,outside) static (interface / Static IP / Dynamic IP)