Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco ISE 1.1.4 Patch Installation Issue

     

     

    Introduction

    User has a standalone ISE, running at 1.1.4.218. While attempting to upload/install the patch bundle, nothing appears to happen. Under patch management, it is noticed "no data available". In the Operations Audit reports, there is no record of a patch install succeeding or failing or attempting.

    Also the checked the md5 hash of the tarball, and the download matches the listed hash on the downloads page.

    User is attempting patch 1using the web GUI as per the user guide. Which CLI command is it? application upgrade?

    Solution

    Use CLI To install a patch bundle of the application, use the patch command in the EXEC mode.

    patch install patch-bundle repository

    http://www.cisco.com/en/US/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html

    Please ensure ACS is able to read the files in the repository before issuing the command.

    Its a known issue with ACS 5.x and ISE.

    Reference

    This document was generated from the following discussion: ISE 1.1.4 patch not installing

    Version history
    Revision #:
    2 of 2
    Last update:
    ‎08-29-2017 06:17 AM
    Updated by:
     
    Labels (1)
    Contributors