Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Client cannot access PDM - PDM must be configured to allow client IP address

Core issue

The client's IP address must be allowed to connect to the PIX before PIX Device Manager (PDM) can be loaded in the client's browser.

Resolution

From the command-line interface of the PIX, you must enter the IP address of the client(s) that are permitted to connect to this PIX using PDM.

Use the http ip_address [netmask] [if_name] command to add the client's IP address to the list of IP addresses allowed to connect to the PIX on PDM.

PIX sylog indicates, PIX-6-605001: HTTP daemon interface int_name: connection denied from IP_addr

Problem Type

Connectivity to the device

Troubleshoot software feature

Product Family

Firewall management applications

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:08 PM
Updated by:
 
Labels (1)