Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Copy TFTP flash fails midway through the image load

Core issue

Network congestion can cause the packets to get lost between the server and the destination device.

Resolution

Try to connect the Trivial File Transfer Protocol (TFTP) server directly to the PIX with a crossover cable.

TFTP is a quick yet unreliable protocol and is therefore subject to problems if packets are lost between the server and the destination device. When you remove these problem areas, it corrects the issue.

Refer to Use the copy tftp flash Command to Upgrade the  PIX for more information on how to upgrade PIX with the TFTP server.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 04:40 PM
Updated by:
 
Labels (1)