Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How to configure an Easy VPN connection between two PIX/ASA (one as server and one as client)

Core issue

This case provides a sample configuration for IP Security (IPSec) between the PIX Easy VPN (EzVPN) Remote Hardware Client and the PIX/ASA EzVPN server. The EzVPN remote feature for the PIX was introduced in PIX version 6.2 and is supported only in PIX 501 or PIX 506/506E. It is also referred to as the Hardware Client. Cisco EzVPN server is supported beginning with PIX Software version 6.0.

Resolution

For information on configuring EzVPN on the PIX, refer to the Configuring Cisco Easy VPN With PIX-to-PIX as Server and Client sample configuration.

To configure EzVPN on PIX/ASA version 7.x, refer to Easy VPN with an ASA as the Server and PIX as the Client

Problem Type

How to (General Information)

Product Family

Firewall - PIX 500 series

ASA Hardware & Software

PIX Software Version

PIX version 6.x

PIX version 7.x

ASA Software Version

7.2

7.0

7.1

PIX Model

PIX 500 Series Firewall

ASA Models

ASA 5500

ASA 5510

ASA 5520

ASA 5540

VPN Tunnel End Points

PIX

ASA

Features & Tasks

Easy VPN

VPN Protocols

IPSec

2718
Views
0
Helpful
0
Comments