Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure AnyConnect Host Scan

 

 

 

Introduction

 

The AnyConnect Posture Module provides the AnyConnect Secure Mobility  Client the ability to identify the operating system, anti-virus,  anti-spyware, and firewall software installed on the host. The Host Scan  application gathers this information.

 

Using the secure desktop manager tool in the Adaptive Security Device  Manager (ASDM), you can create a prelogin policy which evaluates the  operating system, anti-virus, anti-spyware, and firewall software Host  Scan identifies. Based on the result of the prelogin policy's  evaluation, you can control which hosts are allowed to create a remote  access connection to the security appliance.

 

The Host Scan support chart contains the product name and version  information for the anti-virus, anti-spyware, and firewall applications  you use in your prelogin policies. We deliver Host Scan and the Host  Scan support chart, as well as other components, in the Host Scan  package.

 

Starting with AnyConnect Secure Mobility Client, release 3.0, Host Scan  is available separately from CSD. This means you can deploy Host Scan  functionality without having to install CSD and you will be able to  update your Host Scan support charts by upgrading the latest Host Scan  package.

 

Posture assessment and the AnyConnect telemetry module require Host Scan to be installed on the host.

 

Host Scan Packaging

 

You can load the Host Scan package on to the ASA in one of these ways:

 

  • You can upload it as a standalone package: hostscan-version.pkg
  • You can upload it by uploading an AnyConnect Secure Mobility package: anyconnect-NGC-win-version-k9.pkg
  • You can upload it by uploading a Cisco Secure Desktop package: csd_version-k9.pkg

 

Installing or Upgrading Host Scan

 

Enter webvpn configuration mode.

 

ASAName(config)# webvpn

 

Specify the path to the package you want to designate as the Host Scan image. You can specify a standalone Host Scan package or an AnyConnect Secure Mobility Client package as the Host Scan package.

 

ASAName(webvpn)#csd hostscan image disk0:/hostscan-3.6.0-k9.pkg

 

Enables the Host Scan image you designated in the previous step.

 

ASAName(webvpn)#csd enable

 

Saves the running configuration to flash.

 

ASAName(webvpn)# write memory

 

Viewing the Host Scan Version Enabled on the ASA

 

 

Log on to the ASA and enter privileged exec mode. In privileged exec mode, the ASA displays this prompt: hostname#

 

ASAName# show webvpn csd hostscan

 

 

Related link:

 

Assigning AnyConnect Feature Modules to Group Policies

 

CSD host scan products for anti-syware, anti-virus, firewall

 

Cisco Secure Desktop (CSD) FAQ

Version history
Revision #:
2 of 2
Last update:
‎08-23-2017 10:47 PM
Updated by:
 
Labels (1)
Contributors