Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure ASA 5510 with SSM 10

i am new in ASA field, i am wanted to configure the ASA 5510 with SSM 10 module (Trend Micro Module)

Say my public IP pool 10.10.10.10 /248

and my LAN IP pool 192.168.1.0/24

1st I wanted to internet through ASA. 2Mbps lease line terminate in Ethernet.

please any one help me, if possible.

my e-mail ID- kajal@chabria.com

Version history
Revision #:
1 of 1
Last update:
‎12-01-2009 02:08 AM
Updated by:
 
Labels (1)
Comments
Cisco Employee

Hi Kajal,

For setting up internet access on ASA:

Assuming that Ethernet0/1 is your internet interface and Ethernet0/2 is internal network:

Int e0/1

nameif outside

ip address 10.10.10.11 255.255.255.248

int e0/2

nameif inside

ip address 192.168.1.1 255.255.255.0

nat (inside) 1 0 0

global (outside) 1 interface

route outside 0 0 <next_hop_on_outside>

------------------------------------------------------------------------

You can check the following link on how to initialize AIP SSM:

http://www.cisco.com/en/US/docs/security/ips/5.1/configuration/guide/cli/cliInit.html#wp1031112

Then you need to set up policy on ASA to divert the traffic to SSM for inspection:

http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/ssm.html

Cisco Employee

Also to configure the CSC follow document

https://supportforums.cisco.com/docs/DOC-5668

I hope it helps.

PK