Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure multicast routing on the Adaptive Security Appliance (ASA) firewall

Basic requirement for Multicast Routing:

  • Every group member should receive only one copy of the m/c packet
  • Nonmembers must not receive a copy
  • A packet must not visit router more than once (no loops)
  • Paths from the source to each destination must be optimal (shortest path)

Core issue

Multicast and VPN are features that are not supported in multi-context mode at this time. A  tunnel can be configured to pass the multicast traffic through.

Resolution

To setup the firewall to pass the multicast traffic through, refer to these documents:

2394
Views
0
Helpful
0
Comments