Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure Systems Network Architecture (SNA) over an Ethernet LAN connection to a router

Resolution

Enable bridging between transparent  and Source-Route Bridging by configuring a pseudo-ring on each router. In order to accomplish this, apply the source-bridge transparent 40 41 1 1 command on both routers in Global configuration mode.

This is an example:

Hostname(config)#source-bridge transparent 40 41 1 1

For more information on Source-Route Translation, refer to Understanding and Troubleshooting Source-Route Translational Bridging.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:41 PM
Updated by:
 
Labels (1)