Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to rename a context on the FWSM

Resolution

The contexts on an FWSM cannot be renamed because no such command is currently supported.

These workarounds can be used for this issue:

  1. Copy the configuration into Notepad, change the name of the context, and then cut and paste the configuration back into the FWSM. Remove the old context and keep the new one.

  2. Remove the context name with the no context        command. Create a new context with the context command. Then re-use the .cfg file from the old context. 

Note: It is not possible to remove the current admin context with the no context command. The admin context can only be removed if all of the contexts are removed with the clear configure context command.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 04:37 PM
Updated by:
 
Labels (1)
Comments
New Member

Hi ,

Is there any chance you can show an expample with gns3?

Thanks