Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

In a dual-hub dual-DMVPN scenario with routers running Cisco IOS Software Release 12.3, a spoke-to-spoke tunnel fails to come up over a secondary tunnel interface

Core issue

The problem occurs due to the presence of Cisco bug ID CSCed68627.

This issue is seen if a dual-hub dual-Dynamic Multipoint VPN (DMVPN) configuration is used when there is already a dynamic spoke-to-spoke tunnel over a primary tunnel interface, and the primary hub router is unavailable.

It appears that when the primary hub fails, as the IP next-hop converges to the secondary DMVPN, the dynamic spoke-to-spoke tunnel fails to come up.

Resolution

As a workaround, perform either of these steps:

  • Use the dual-hub single DMVPN network configuration.

  • Download and upgrade to Cisco IOS  Software Release 12.4(5).
Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:08 PM
Updated by:
 
Labels (1)
Everyone's tags (4)