cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
792
Views
0
Helpful
0
Comments
TCC_2
Level 10
Level 10

Core issue

The error is typically seen when SDM version 2.3.1 is used and the user tries to add more tunnels with the existing ones.

Resolution

In order to resolve this issue ,download and upgrade to Cisco SDM version 2.3.2.

For more information on how to configure the DMVPN tunnel, refer to Dynamic Multipoint IPsec VPNs (Using Multipoint GRE/NHRP to Scale  IPsec VPNs).

Refer to the Prerequisites section of Dynamic Multipoint VPN (DMVPN) for more information on the minimum requirements you need in order to set up the tunnel.

For more information, refer to the DMVPN Hub Wizard section of the SDM 2.5 User Guide.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: