Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

RMS: How many DS0s are used for a VTG that has 6 Channels?

Question

I have questions regarding to RMS resource requirement. For example, there are 6 radio channels , if we define a VTG to include 6 channels together. How many T1 DS0 channels are required in RMS for this VTG ?

Answer

After creating the VTG, each of the six channels will have a DS0 pair associated with the channel, so will use a total of 12 ds0's (or 6 ds0 pairs).

The IPICS Server dynamically allocates a DS0 Loopback pair (two DS0 channels) for each channel in an "ACTIVE" VTG.

Just a side note, When researching & planning RMS resource requirements for your IPICS Solution there are some other things to consider also, like: Remote PMC users & Dial-in Users.

Please Refer to SRND for IPICS 2.0(1) or 2.1(1) in Chapter 2 Cisco IPICS Component Considerations in the RMS Overview.

Composed 09-12-2007

Version history
Revision #:
1 of 1
Last update:
‎06-09-2009 12:55 AM
Updated by:
 
Labels (1)
Everyone's tags (3)