Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

The ASA 5510 unit hangs on the initial setup after an upgrade from a Linksys firewall

Core issue

During a migration from any other firewall to the Adaptive Security Appliance (ASA), the unit hangs and does not respond to any connection. Traffic does not pass through the device after it is replaced.


To resolve this issue, perform these steps:

  1. Check the routing table to confirm that the default route has been added to the configuration.

  2. Configure the service policies according to the applications used in the network. Issue this command:

    policy-map global_policy
    class inspection_default

  3. Reboot the Internet Service Provider (ISP) router, so it can learn the MAC address of the ASA.



Features & Tasks

Initial setup

Version history
Revision #:
1 of 1
Last update:
‎06-17-2009 10:20 PM
Updated by:
Labels (1)