Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The Cisco VPN Client is unable to connect to the headend device and receives the Sev=Warning/3 CVPND/0xE340000D error message. The Cisco VPN Client is unable to enable the virtual adapter because it cannot set the IP configuration to registry warning

Core issue

It is possible that Windows did not fill in all the information needed in the registry when it installed the virtual adapter. Setting this manually triggers Windows to initialize what it missed the first time. Sometimes, these warnings are also found:

Sev=Warning/2 CVPND/0xE3400014
The VPN Client could not find the adapters GUID - Virtual Adapter's tcpip GUID failed: 2.

Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable

Resolution

To resolve this issue, perform these steps:

  1. Go into the Network Properties and find the Cisco Systems Virtual Adapter.

  2. Open it and assign it an IP address manually. Any IP address can be assigned.

  3. Click OK.

This triggers Windows to initialize what it missed the first time.

4037
Views
0
Helpful
0
Comments