Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The client is not configured to use PIX as default gateway.

Core issue

The client is not configured to use PIX as default gateway.

Resolution

  1. Verify that the client's default gateway is set to the inside interface of the PIX.
  2. Verify that the PIX configuration has a translation (either a nat and corresponding global statement or a static statement) for the inside host. To check the translation, issue the show xlate command.
  3. Verify that there is an access-list statement applied to the outside interface permitting Internet Control Message Protocol (ICMP) echo-replies back in through the PIX. (Conduits can also be used.)

For more information about these PIX commands, check the Cisco Secure PIX Firewall Command References for your software version.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:42 PM
Updated by:
 
Labels (1)