Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The SSL VPN Client is unable to use WCCP through ASA

Core issue

WCCP does not work when the SSL VPN Client comes from the outside interface.The only topology that the security appliance supports is when client and cache engine are behind the same interface of the security appliance and the cache engine can directly communicate with the client without going through the security appliance.

Resolution

To resolve this issue, use the Microsoft Internet Explorer proxy feature in Adaptive Security Appliance (ASA), running version 7.2.x to automatically set the client-side proxy settings. This can be defined under the group policy used for SSL VPN users.

For more information, refer to the Configuring Group Policies section of Configuring Tunnel Groups, Group Policies, and Users.

For additional help on WCCP re-direction, refer to the WCCP Feature Support  section of Configuring DHCP, DDNS, and WCCP Services.

Problem Type

Troubleshoot software feature

Product Family

ASA Hardware & Software

ASA Software Version

7.1

7.0

ASA Models

ASA 5500

Client Location on Network with PIX

Outside

VPN Tunnel End Points

ASA

VPN Protocols

SSL VPN/ WebVPN

Version history
Revision #:
1 of 1
Last update:
‎06-17-2009 10:15 PM
Updated by:
 
Labels (1)
Comments
New Member

Is this still the case with 8.x and 9.x?

--

Jens