Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VPN Client user cannot connect to the PIX Firewall

Core issue

The PIX Firewall needs to be configured to communicate with a TACACS+ or RADIUS server.

Resolution

To resolve this issue, perform these steps:

  1. Configure Authentication, Authorization and Accounting (AAA) on the PIX Firewall and AAA server.  

  2. Re-enable extended authentication (Xauth).  

  3. Retry the client VPN connection.

For more information, refer to these documents:

PIX Software Version

PIX version 5.x

PIX version 6.x

VPN Tunnel Initialization

Cannot pass phase I (Internet Security Association and Key Management Protocol [ISAKMP])

1057
Views
0
Helpful
0
Comments